Dataprobe iBoot-G2 Operation Manual - Manual (Page 24)

V140506E iBoot-G2+ Page 24

Confirm Registration by clicking on the link provided in the email.
b. Insure Proper iBoot-G2 Firmware
iBoot Cloud Service requires version iBoot-G2 Firmware version 1.21.99 or greater. Check the bottom of
any web page of the iBoot for the firmware version. If needed, download and install the proper iBoot
Firmware from
http://dataprobe.com/support_iboot-g2.html and install as instructed in Section 11
c. Enable Cloud Services on iBoot
Log into the iBoot with Administrator rights
Go to the Network Setup page
Click on the checkbox Enable Cloud Services:
Within 30 seconds, an 8 character activation code
will appear.
This code is also a hotlink to the Cloud Service.
d. Register iBoot with Cloud Account
Click on the Activation code to register the iBoot with
the Service.
You will be re-directed to the Service. Log-in with
your account and the iBoot will be automatically
registered with your account.
Alternatively, you can log in to the Service and click
on Add Device and enter the activation code in the
field provided.
Congratulations. You are now on the cloud.
e. iBCS Main Page
The iBCS main web page provides a menu bar with
the following options:
Devices: List all registered iBoot units, ordered by
their Name. Click on any iBoot line to manage that
unit.
Locations: Group all iBoots by location. Click on
any location to display or hide all the iBoots at that
location.
Account: Display and edit account information and
obtain account access history.
Help: Links to the iBoot Cloud Forum and
Dataprobe support pages.