Daktronics ScoringTiming Interface (DSTI) - Manual (Page 13)

DSTI Setup 7
2.7 Button Panel Area
The button panel area (Figure 5) consists of two drop-down
boxes and five buttons; Sport, Interface, View Configuration,
View Data, Venus 1500 Displays, Press Row Monitors, and
Start/Stop Switch. The following sections define each of these
buttons and menus.
Sport Menu
The Sport menu lists all the sports currently configured for the
specific site. If the desired sport is not present, select All Sport
5000. This configuration takes the information from the All
Sport 5000 console and outputs the information to a display
controller.
Interface Menu
The Interface menu contains the different statistic and control
devices available for each sport selection. Select a sport, and
then select a device or statistic package available to the sport.
View Configuration
Click View Configuration to toggle on and off the input/output configurations for the DSTI
program. This is useful for troubleshooting any problem that may arise from a mistaken or
inappropriate port connection. Users must contact Daktronics to modify any of the
information contained within this screen.
View Data
Click View Data to toggle on and off the information received from statistic creation devices
such as DakStats software and the All Sport console (Figure 6). Not only does this allow the
user to see the game statistics progress throughout the event, but it can also provide valuable
diagnostic information.
Figure 5: Button Panel
Figure 6: View Data Window for DakStats Baseball