Daktronics AF-3090-89-R,A - Manual (Page 25)

Electrical Installation
3-10
3.10 First Time Turn On
When first powered up, the display will run through an initialization in which it will display the
following:
1. Output Test (DDDs)
2. Product Name (Galaxy)
3. Display Size (Row x Column)
4. Firmware Number (ED-10134)
5. Firmware Revision (Rev X.XX)
6. COM1 Configuration (C1: V15/RTD)
7. COM Configuration (C2: None)
8. Line Frequency
9. Hardware Address (HW:XX)
10. Software Address (SW:XX)
11. Display Name
12. Modem (If modem is present)