Daktronics DF-2100 - Manual (Page 44)

36 RC-100 Controller
CHANGE
FUNCTION?
PRESS SET
FUNCT
•
This message appears next on the screen.
•
If “GAS PRICE” was shown on the bottom line
of the LCD during startup, do nothing. The
controller will automatically default to previous
Gas Price settings.
•
If a function other than “GAS PRICE” was
shown on the bottom line of the LCD during
startup, press the [Set Function] key while
the second LCD prompt is displayed.
SELECT
FUNCTION
GAS PRICE
↓↑
•
Press the arrow up or down keys< ↑ ↓ > until
the gas price option is shown. Press the
[Enter] key to accept.
The RC-100 handheld controller should now be ready for use. The controller will
“remember” the last function setting, so this step should only need to be done with a new
controller or one that is configured for different displays. To operate the RC-100, press any of
the keys listed in the following petroleum price sections.
RC-100 Controller Operation
The Petroleum Price Controller LCD display will default to showing the current display
settings on power up. The following text will be shown on the LCD.
LCD Screen Action
LINE PRICE
1
↓ $1.23 9/10
TO
MODIFY
1
↓ $1.23 9/10
•
The display will toggle between these two
screens.
•
Press the up or down arrow keys < ↑ ↓ > to
scroll through the current setting for any of the
lines on the display.
•
Press the [Enter/Edit] key to modify any of
the line settings.