Daktronics DF-2100 - Manual (Page 31)

Section 6: DM-100 Controller
This section describes the set up and operation of the DataMaster 100 (DM-100) Controller. The DM-
100 may be used with either an indoor or outdoor j-box, both of which are explained in this section.
Note also the information on the DataMaster Insert.
Reference Drawing:
Address Dip Switch Settings........................................................................... Drawing B-256001
Insert, LL-2551 Price/T&T Display .................................................................. Drawing A-167856
6.1 DM-100 Overview
The DataMaster 100 Series controller, shown in Figure 9, is a
hand-held controller designed to operate Daktronics LED
DataMaster
displays. This lightweight controller is encased in
ABS plastic, making it a durable and convenient control
option. The console’s liquid crystal display (LCD) guides the
user through the operation of the system.
Figure 17: DataMaster (DM) 100
The DM-100 can be configured to display petroleum price,
motel rates, and time and temperature data. Refer to
Drawing B-256001 for information on possible control
options and connection procedures.
Note: When the carrier delivers this Daktronics order, open
the packages and inspect for shipping damage such as
rattles and dents. See that all equipment is included as
shown on the packing slip. If deficiencies are found,
immediately report them to Daktronics. Save all
packing materials in case warranty repair or exchange
is needed.
Replacement Parts List
The following is a list of possible replacement parts for the DM-100 controller. When re-
ordering a part, be sure to use its corresponding part number. To obtain a part from
Daktronics, refer to Section 5.3 for instructions.
Description Daktronics Part No.
Wall pack transformer T-1118
DM- 100 controller 0A-1196-0088
Control Insert LL-2551
Cable, DB-9 male to DB-9 female, 10' W-1267
DM-100 Controller 23