Daktronics DF-2100 - Manual (Page 10)

Model Number
The DataMaster model number for these displays is described as follows:
2 Introduction
DF-2100-HH-C-X#-SF
DF-
2100 =
Outdoor digit display with backlit ID panel
HH = Digit height in inches
C = LED Color- R (Red), A (Amber), or G (Green)
X# =
Illuminated product ID, options:
L# - Left product panel,
# indicates nominal cabinet width (ft)
T# - Top product panel,
# indicates nominal cabinet width (ft)
SF = SF – Single Face, one cabinet
1.2 Drawing and Label Information
Drawings are sometimes referenced at the beginning of a section. Daktronics identifies
drawings with a number which is located in the bottom right corner of each drawing (Figure
3). This reference number includes the last set of digits and the letter preceding them. The
drawing in this example would be referred to as Drawing A-244838.
Figure 3: Daktronics Drawing Label
The serial and model numbers of a Daktronics display can be found on the ID label inside the
display. The label will be similar to the one shown in Figure 4. When calling Daktronics
Customer Service, please have this information available to ensure that your request is
serviced as quickly as possible. For future reference, note the display model number, serial
number, and installation date inside the front page of this manual.
Figure 4: Display Identification Label