Daktronics DF-2100 - Manual (Page 39)

DM-100 Controller 31
Dimming
The dimming level of the Rate display can be adjusted in two ways. A light sensor, mounted
on each driver, can detect the level of ambient light at the display location and dim the sign's
LEDs accordingly. This function is known as automatic dimming. When the manual
dimming function is selected, the LEDs remain at the same level of brightness regardless of
the level of light detected at the display.
To select either of these functions, press [Dimming]. The current setting is shown on the
bottom line of the LCD.
LCD Screen Action
DIMMING
AUTOMATIC
↓
Press the down arrow key < ↓ > to toggle
through dim settings:
Automatic – The display automatically dims
based on the light detected at the display
Manual – The display dimming level is set
manually. Once set, this value remains
regardless of the level of light detected at the
display.
If AUTOMATIC dimming is selected, the following LCD prompt will be shown:
LCD Screen Action
SET AUTO
DIMMING
MAX INTENSITY? Press the [Enter/Edit] key to edit the auto
dimming max intensity. This is the maximum
intensity that the display will use in full-bright
modes (during daylight hours).
Press [Clear] to keep the current auto dimming
maximum setting.