Comtech EF Data CSAT-6070 - Manual (Page 46)

50 Watt Model C-Band Transceiver Revision 0
Installation MN/CSAT607050.IOM
2.6.2.1 A SSEMBLE W AVEGUIDE S WITCH , AS/0462
Refer to Figure 2-19.
Figure 2-19.
Assemble Waveguide Switch, AS/0462
1. Refer to Table 2-12, Figure 2-16
and Figure 2-19
2. Remove all protective tape from
switch and keep it clean.
3. Install waveguide termination (1)
and gasket (3) to Port 3 of switch
(7) and secure with bolts (6),
lockwashers (5), and flat washer
(4).
4. Install waveguides (2) and gaskets (3) to Ports 2 and 4 of switch (7) and
secure with bolts (6), lockwashers (5), and flat washers (4).
5. Finished assembly should look identical to Fig 2-19
6. Set waveguide switch assembly aside for later installation.
2.6.2.2 A SSEMBLE LNA S WITCH K IT , AS/0438
Figure 2-20. Switch Port Locations
2-22