Comtech EF Data CSAT-6070 - Manual (Page 34)

50 Watt Model C-Band Transceiver Revision 0
Installation MN/CSAT607050.IOM
2.4.3 LNA I
NSTALLATION
Refer to Figure 2-8.
Figure 2-8. Installation of LNA
The LNA is mounted to the OMT as follows:
• Waveguide Kit, CPR229, PN AS/0461
To install a single LNA to an antenna:
1. Remove the protective cover from the antenna OMT and LNA.
2. Install the appropriate gasket on the antenna end of the LNA.
a. If only one of the mounting surfaces has a groove, use the half-thick
gasket.
b. If both mounting surfaces have grooves, use the full thick gasket.
3. Position the LNA (with gasket) in place on the antenna and fasten using
the supplied hardware.
2-10