Comtech EF Data CiM-25/9000 User Manual
Page 48
CiM-25/9000 IP Enabled M&C
Rev. 1
Operation
CD/CIM259000.IOM
30
3.5.1.8 C
HANGE
R
EAD
O
NLY
P
ASSWORD
Using the !RP command, the Administrator can change the Read/Only login Password.
The command protocol for this command is as follows:
Format:
!RP
Where:
Query Format:
!RP ?
Response:
!RP
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.9 E
NABLE OR
D
ISABLE
PING
Using the !PG command, the Administrator can either enable or disable PING. The
command protocol for this command is as follows:
Format:
!PG
Where:
0 = Disabled, 1 = Enabled
Query Format:
!PG ?
Response:
!PG
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.10 C
OMMIT
C
HANGES TO
EEPROM
Using the !EE command, the Administrator can commit any previously commanded
changes to EEPROM. This will store the new operating parameters and automatically do
a warm reboot of the CiM-25/9000. The command protocol for this command is as
follows:
Format: !EE
3.5.1.11 C
HANGE
P
RIMARY
/S
ECONDARY
DNS IP A
DDRESSES
Using the !DN command, the Administrator can set the primary and secondary DNS IP
Addresses. The command protocol for this command is as follows:
Format:
!DN
Response: Command
Successful