Comtech EF Data CiM-25/9000 User Manual
Page 46
CiM-25/9000 IP Enabled M&C
Rev. 1
Operation
CD/CIM259000.IOM
28
3.5.1.2 C
HANGE
H
OST
A
LLOW
L
IST
Using the !HA command, the Administrator can modify the Host Allow List. The
command protocol for this command is as follows:
Format:
!HA
Where:
address index is 1 to 6, ranged is 0 if No and 1 if yes
Example:
!HA 5 10.50.91.200 0
This sets IP address #5 to 10.50.91.200 and indicates addresses #5 & #6 are NOT ranged.
Query Format:
!HA ?
Response:
IP 1: 000.000.000.000
IP 2: 255.255.255.255
Range = yes
IP 3: 000.000.000.000
IP 4: 000.000.000.000
Range = no
IP 5: 000.000.000.000
IP 6: 000.000.000.000
Range = no
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.3 C
HANGE
A
DMINISTRATOR
N
AME
Using the !AD command, the Administrator can change the Administrator login Name.
The command protocol for this command is as follows:
Format:
!AD
Where:
Query Format:
!AD ?
Response:
!AD
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.4 C
HANGE
A
DMINISTRATOR
P
ASSWORD
Using the !PW command, the Administrator can change the Administrator login
Password. The command protocol for this command is as follows:
Format:
!PW
Where:
Query Format:
!PW ?
Response:
!PW
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25