Comtech EF Data CiM-25/9000 - Manual (Page 20)

CiM-25/9000 IP Enabled M&C Rev. 1
Introduction CD/CIM259000.IOM
2
The CiM-25 uses flash technology providing support for a wide variety of products from
a single hardware platform. The CiM-25 either currently or will in the near future
support the following Comtech EF Data equipment:
Modems
SDM-300L1* SDM-300A/SLM-3650*
SDM-300L2* CDM-550T
SDM-300L3 CDM-600*
SDM-2020M* SDM-2020D*
SDM-8000* SDM-9000*
Frequency Converter
UT4500 series 1 kHz and 125 kHz step size Up Converters*
DT4500 series 1 kHz and 125 kHz step size Down Converters*
Solid State High Power Amplifiers
All C-Band SSPA models*
All Ku-Band SSPA models*
*Requires an external 5 Vdc Power Supply (universal AC input). See section 2.3.1,
Powering the CiM-25.
1.2 S
PECIFICATIONS
SYSTEM SPECIFICATIONS
Ethernet Interface 10base T (RJ-45)
Equipment Interface DB9 Female on CiM-25F
DB9 Male on CiM-25M
ENVIRONMENTAL AND PHYSICAL
Temperature Operating: 0 to 50º C
Storage: -25 to 70º C
Power Supply 4.75 to 5.25 Vdc
Power Consumption 0.9 W typical, 1.5 W maximum
Physical Dimensions L=110, W=43, H=20 (mm)
L=4.3, W=1.7, H=0.8 (inches)
Weight < 1 lbs
CE Approvals EN55022 Class B (Emissions)
EN50082-1 Part 1 (Immunity)
EN60950 (Safety)
FCC Approval FCC Part 15 Class B