Comtech EF Data turboIP v4.0 - Manual (Page 48)

turboIPv4.0 Revision 6
Configuring turboIP ™ MN/TURBOIP.IOM
4–20
4.5.3 CLI - G
ATEWAY
C
ONFIGURATION
M
ENU
Function Select Description
LAN L LAN Transmission Rate – 10Mbps/100Mbps
W WAN Transmission Rate – (a number, followed by a space and
'bps', 'kbps' or 'Mbps'). Must be ≥ 10 kbps and ≤ 15 Mbps WAN
M Maximum Transfer Unit (MTU): MTU size in bytes, default 1500
Compression C Select - On/Off
Congestion Control O Select – Per-Connection or Rate Pacing
4.5.3.1 WAN T
RANSMISSION
R
ATE
Set the maximum bandwidth available for TCP traffic on the WAN interface (a
number, followed by a space and 'bps', 'kbps' or 'Mbps'). Must be ≥ 10 kbps and
≤ 15 Mbps. Setting WAN transmission rate in excess of available bandwidth could
lead to a packet loss and degraded performance.
If you have a mix of TCP and non-TCP traffic, use this setting to limit the
bandwidth for TCP traffic.