Comtech EF Data CMR-5950 Manual - Manual (Page 45)

CMR-5950 Digicast Media Router Inline Scrambler (IS) Revision A
Device Management via User Interfaces MN/INLNSCRDC.IOM
4.4 Telnet Interface
Telnet provides a textual interface over a LAN. Most PCs have the capability to use
Telnet. To use Telnet on a Microsoft Windows
®
product, click , then .
The Run dialog box is shown in Figure 4-26. In the Open: text window, enter “telnet
xxx.xxx.xxx.xxx,” where xxx.xxx.xxx.xxx is the IP address of the IS. If the port number
has been modified from the
standard 23 via the Terminal Interface, then the port number
must be appended with a colon to the IP address.
Figure 4-26. Starting Telnet Session
The user will be prompted to enter the user name and password to gain access to the
Telnet interface.
NOTE
The default username is
comtech and the default password is
comtech, both of which are case sensitive.
Once the menu is started, press and the IS Main Menu will display as shown in
Figure 4-27.
Figure 4-27. Main Menu via Telnet
4-21