Comtech EF Data CMR-5950 Manual User Manual
Page 27
CMR-5950 Digicast Media Router Inline Scrambler (IS)
Revision A
Device Management via User Interfaces MN/INLNSCRDC.IOM
The IS Administrative Configuration page contains the following configurable parameters:
Unit Name
The Unit Name assigned to the device.
User Name
The User Name is user configurable and is used for connecting to the unit via IP
management services.
The default user name is
comtech
.
Password
The Password is user configurable and is used for authenticating a user when
connecting via IP management services.
The default password is
comtech
. The password is case sensitive and must be
entered carefully.
When the password is changed, the user will be prompted to enter the password
twice to verify it is correct.
System Contact
Contact information of the system administrator for support.
System Location
The physical location where the unit has been installed.
SNMP server IP address
The IP Address where SNMP traps are to be directed.
Enable Telnet
Enables Telnet application on the IS.
Login Required
A user name and password are required to make any changes to the IS
configuration.
Update Firmware
Allows software/firmware changes to be made. User name and password is
required for security.
4-3