Compuprint 9070 - Manual (Page 96)

91
PATH FRONT 1 Paper loading with the Front1 push tractor (low position).
PATH FRONT 2 Paper loading with the Front2 push tractor (up position).This item is displayed only if
the Front2 push tractor option is installed (PRT9071 model only).
PATH MANUAL FORM Paper loading using manual cut sheet path (PRT9070 model only).
PATH PUSH PULL Paper loading with the Front1 push tractor and the rear pull tractor. This item is
displayed if the rear pull tractor option is also installed.
CUT+FRONT1 PUSH Paper loading using the manual paper path in overlay over the fanfold loaded with
the Front1 push tractor. The paper overlay function must be set to PAPER OVERLY
YES
(PRT9070 model only).
CUT+ FRONT
PSHPUL Paper loading using the manual paper path in overlay over the fanfold loaded with
the push-pull tractors. The paper overlay function must be set to PAPER OVERLY YES
(PRT9070 model only).
PATH ASF1 Paper loading from the first bin of the ASF option, if installed.
PATH ASF2 Paper loading from the second bin of the ASF option, if installed.
PATH ASF3 Paper loading from the third bin of the ASF option, if installed.