Compuprint 9070 - Manual (Page 123)

118
4. The loading mode of the cut sheet depends on the value set for the QUICK function in the
Power-On Configuration:
Manual loading mode
(QUICK NO) Make sure that the printer is disabled. Insert a cut sheet onto the front
paper support and press the LOAD/FF key to feed the paper. Press the
ON LINE key to enable the printer.
Automatic loading mode
(QUICK YES) Insert a cut sheet onto the front paper support, the paper will be loaded
automatically after 2 seconds. The LOAD/FF key can be used to load the
paper into the printer, before the 2 seconds have passed.
5. To lower the paper feed support, free the
paper support holder below the support
and replace the support in its initial
position.