Compuprint 9070 User Manual
Page 79
74
Adjusting the Cut Position
This item is displayed only if Cutter option is installed.
TEAR ADJUST: xxx
↑
CUT ADJUST: - 30
→ or ←
CUT ADJUST: ...
→ or ←
CUT ADJUST: +360
→ or ←
↓
BUZZER YES
CUT ADJUST: xxxx
These values adjust the position in which the paper is cut. The values
correspond to 1/180 inch units, i.e. the tuning ranges between -1/6 and 2 inch.
0 is the default value.