Compuprint 9070 User Manual
Page 117
112
If at power on the paper is already loaded in a paper path that is different to the paper path
used by the macro which is valid at power-on, independently from the setting of the TEAR
function, the display shows TEAR IF NECESS./EJECT PAPER. If the paper to be ejected is
longer than 18" tear it off and press the
PARK
key again to perform the paper ejection.
In all the above cases the parking procedure may be interrupted pressing the
ALTERNATE
key.
The display shows OPER. INTERRUPTED.
If in any of the above cases you do not tear off the paper and the printer is not able to park it,
because it is too long, the display shows TEAR OFF PAPER/PARK PAPER. Tear off the paper and
press again the
PARK
key.
During the parking procedure the display shows PARKING. If the printer is ejecting the paper
(see LABEL selection) the display shows EJECTING.