Compuprint 9070 - Manual (Page 32)

27
ON LINE Key
ON LINE
Enables or disables the printer. Normal
Function
• If this key is pressed while powering the printer on, the self test is printed;
the printout is stopped pressing this key again.
• In an error condition, once the error cause has been removed, press this
key to enable the printer
Program
Function Pressing this key, the input buffer is cleared an a break (250 msec.) on a serial
interface is sent. The message RESET & BREAK is displayed.
PROGRAM Key
PROGRAM
Enables the printer setups as follows: Normal
Function
• Pressing this key while powering on the printer, the Power-On
Configuration is selected.
• Pressing this key when the printer is enabled without printing or disabled
the Program Setup is enabled ( PROGRAM indicator lit).
Program
Function Exits the printer setups.
MACRO Key
MACRO
Normal
Function Selects one of the user macros (Macro 1, Macro 2, Macro 3 or Macro 4). If you
want to select the displayed macro, wait for 2 seconds without pressing any
key and the parameters of this macro will be set .
→ Program
Function Scrolls the parameters of the functions or macros forwards.