Compuprint 9070 User Manual
Page 138
133
Messages Indication
Solution
NO PATH AVAILABLE
An electromechanical
failure occurs in the paper
paths.
Call Service.
NVM CHANGE
REMOVE PAPER
If this error is displayed
during the printer power
on, an NVM error
condition occurs
Turn the printer off and then on again. If the
problem is not solved call Service.
PAPER JAM
CHECK ALL PATHS
A paper jam error
condition occurs in the
paper path
Check all the paper paths and remove the
jammed paper. Press the
ON LINE
key to reset
the error condition.
PRINT INTEGRITY
Anomalous print out
because of a possible print
carriage blocking
¾Do not move the platen knob.
Press the
ON LINE
key to reset the error
condition
RIBBON BLOCKED
CHECK RIBBON
The ribbon of the cartridge
is blocked
Check that the ribbon is correctly inserted.
Turn the tension knob to make sure that the
ribbon is not jammed. Press the
ON LINE
key
to reset the error condition.
UNKNOWN
TRACTOR
A tractor type that is not
recognized has been
mounted on the printer.
Check that the installed tractor is compatible
with the printer.