How to select the paper path – Compuprint 9070 User Manual
Page 108
103
H
H
o
o
w
w
t
t
o
o
S
S
e
e
l
l
e
e
c
c
t
t
t
t
h
h
e
e
P
P
a
a
p
p
e
e
r
r
P
P
a
a
t
t
h
h
The paper can be loaded into the printer using different paper paths. The messages indicating the
paper paths are shown only if the corresponding loading device is installed on the printer.
Proceed as follows:
1. Press the
ON LINE
key to put the printer offline (
ON LINE
indicator unlit).
2. Press the
PATH
key, according to the installed devices the following messages are displayed:
LOAD FRONT 1
For the paper path using the Front1 push tractor.
LOAD FRONT 2
For the paper path using the Front2 push tractor option (PRT9071 model only).
LOAD MANUAL
For the manual cut sheet paper path (PRT9070 model only).
LOAD PUSH-PULL
For the paper path using the Front1 push tractor and the rear pull tractor option.
LOAD ASF1
Loading a cut sheet from the 1
st
bin of the Automatic Sheet Feeder (ASF) option.
LOAD ASF2
Loading a cut sheet from the 2
nd
bin of the Automatic Sheet Feeder (ASF) option.
LOAD ASF3
Loading a cut sheet from the 3
rd
bin of the Automatic Sheet Feeder (ASF) option.
• To load fanfold paper go to “
Loading Paper Using the Front1 Push Tractor
Using the Front2 Push Tractor (option)
Loading Paper Using the Front1 Push Tractor and
the Rear Pull Tractor (option)
”. When a new paper path is selected, the paper loaded in the
printer is automatically parked.
• To load manual cut sheets go to
• For using paper with the Automatic Sheet Feeder option, consult the documentation you
receive together with the option.