Compuprint 9070 User Manual
Page 28
23
Message Description
MICRO FEED DOWN
The paper is fed in microsteps downwards when pressing the
↓
arrow key .
MICRO FEED UP
The paper is fed in microsteps forwards when pressing the
↑
arrow key.
OPT. I/F CHANGED
PRESS ON LINE
These messages are displayed at power on when the I/F board option has been
changed previously in the printer. Press the
ON LINE
key to confirm.
OPER. INTERRUPTED
This message is displayed if the
ALTERNATE
key has been pressed to interrupt a
park procedure.
PARKING
The printer is parking the fanfold paper.
PATH CHANGING
The path has been changed and the printer is updating the settings.
PRESS A KEY
NVM CHANGED
The NVM has been changed. Press any key to set the printer.
RELEASE KEY
This message is displayed when you can release the
PROGRAM
key in the Self-
test selection or in the Power-on Configuration procedure.
REMOTE CONTROL
This message is displayed when the printer operates from remote control (only
if the LAN interface board is installed).
RESET & BREAK
The printer received a reset and break command via interface.
SELF TEST
Printing the self-test page.
TEAR IF NECESS.
EJECT PAPER
These messages are displayed when the printer receives a paper parking
command and the TEAR NO item is selected for the tear-off function. Tear off
the fanfold then press the
PARK
key to eject the paper.
TEAR IF NECESS.
These messages are displayed when the printer receives a paper parking