Compuprint 4247-L03 Programmer Manua - Manual (Page 80)

Decimal Value 20 20 27 84 n
Range 0 ≤ n ≤ 1
n Selection
0 Selects and loads the fanfold from the Front1 path. If the paper is present (cut sheet/fanfold), the printer
automatically parks this fanfold that is not requested before loading the new one (after having pressed the
PARK
key in response to the TEAR IF NECESS/PARK PAPER message).
1 Parks the fanfold loaded from the Front1 path to allow the tear off function (after having pressed the PARK
key in response to the TEAR IF NECESS/PARK PAPER message).
DC4 DC4 ESC Y
Selects emulation.
ASCII Code DC4 DC4 ESC Y n
Hexadecimal Value X'14' X'14' X'1B' X'59' n
Decimal Value 20 20 27 89 n
Selects the printer emulation type according to the n parameter value:
n Emulation
0 Default printer emulation
1 EPSON LQ Series
2 IBM Proprinter XL 24
4 IBM Proprinter XL 24 AGM
5 IBM 2391+
DC4 DC4 ESC Z
Makes AGA in column.
ASCII Code DC4 DC4 ESC Z n
Hexadecimal Value X'14' X'14' X'1B' X'5A' n
Decimal Value 20 20 27 90 n
The n parameter is the column number at 10 cpi where the AGA (Automatic Gap Adjustment) is made.
DC4 DC4 ESC u
Selects the user macros.
ASCII Code DC4 DC4 ESC u n
Hexadecimal Value X'14' X'14' X'1B' X'75' n
Decimal Value 20 20 27 117 n
Range 0 ≤ n ≤ 4
n Selection
1 Selects User Macro 1
2 Selects User Macro 2
4 Selects User Macro 3
64 Programmer Manual