Compuprint 4247-L03 Programmer Manua - Manual (Page 107)

FS K
Resets character rotation.
ASCII Code FS K
Hexadecimal Value X'1C' X'4B'
Decimal Value 28 75
This command resets the vertical print which was set by FS J and resumes horizontal printing.
FS D d1 d2
Composes two half-width, rotated characters into a normal size rotated character space.
ASCII Code FS D d1 d2
Hexadecimal Value X'1C' X'44' d1 d2
Decimal Value
v d1 = 1' character address
v d2 = 2' character address
The d1 character is printed in half width and rotated 90° counterclockwise.
The d2 character is composed in half width, rotated 90° counterclockwise, and it is printed above the d1
character.
The occupied space is the same as a normal size rotated character.
FS - n
Sets - Resets underline mode.
ASCII Code FS - n
Hexadecimal Value X'1C' X'2D' n
Decimal Value 28 45 n
Range
n = 0 resets underline mode.
n = 1 sets single underline mode.
n = 2 sets double underline mode.
This command sets two different types of underline:
n=1
A single dotted line.
n=2 A double dotted line.
Unrelining character will terminate when a new FS- n command is received and n=0.
Chapter 5. Epson LQ1600K Emulation 91