Compuprint 4247-L03 Programmer Manua - Manual (Page 46)

n Selection
0 Normal speed printing
1 Quiet speed printing
ESC T
Cancels subscript or superscript printing (IBM/EPSON).
ASCII Code ESC T
Hexadecimal Value X'1B' X'54'
Decimal Value 27 84
This command cancels subscript or superscript printing started with the ESC S command.
ESC W
Sets or cancels double width printing (IBM/EPSON).
ASCII Code ESC W n
Hexadecimal Value X'1B' X'57' n
Decimal Value 27 87 n
Range 0 ≤ n ≤ 1
Enables or disables double width printing. See the following table:
n Selection
0 Double Width Printing disabled
1 Double Width Printing enabled
ESC w
Sets or cancels double height printing. (EPSON)
ASCII Code ESC w n
Hexadecimal Value X'1B' X'77' n
Decimal Value 27 119 n
Range 0 ≤ n ≤ 255
Enables or disables double-height printing of all characters. The first line of a page is not doubled if the
ESC w command is sent on the first line; all following lines are printed at double-height. Double-height
printing overrides superscript, subscript, and condensed. Superscript, subscript, and condensed print
resumes when double-height printing is canceled. See the following table:
n Selection
0 Double Height Printing disabled
1 Double Height Printing enabled
ESC x
Selects Letter Quality or Draft. (EPSON)
30 Programmer Manual