Compuprint 4247-L03 Programmer Manua - Manual (Page 59)

Data Input Control
CAN
Cancels line. (EPSON)
ASCII Code CAN
Hexadecimal Value X'18'
Decimal Value 24
This code clears all printable characters and bit-image graphics on the current line. This code moves the
print position to the left-margin position.
CAN
Cancels data. (IBM)
ASCII Code CAN
Hexadecimal Value X'18'
Decimal Value 24
This code clears all data stored in the preceding print buffer but does not change the current print position.
DC1
Selects printer. (IBM)
ASCII Code DC1
Hexadecimal Value X'11'
Decimal Value 17
This command causes the printer to be enabled after it has been disabled by the ESC Q command.
DC1
Selects printer. (EPSON)
ASCII Code DC1
Hexadecimal Value X'11'
Decimal Value 17
This command causes the printer to be enabled after it has been disabled by the DC3 command.
DC3
Deselects printer. (EPSON)
ASCII Code DC3
Hexadecimal Value X'13'
Decimal Value 19
This code deselects the printer. The printer remains deselected until it receives a DC1 command or power
is turned off then on again. The printer ignores the ESC @ command (initialize printer) when it is
deselected.
Chapter 2. EPSON/IBM Mode 43