Compuprint 3056 - Manual (Page 51)

42
6. Close the sprocket cover.
7. Slide the right sprocket to tension the continuous paper, and then lock it.
8. Place paper guide to keep it horizontally, and then slide the left and right
edge guides to the center of the paper.
9. Turn on the printer. When the printer receives data from PC, it will print
after loading paper automatically.
Remove continuous paper from the rear tractor
1. Press “tear off” button to feed the paper to the tear-off position before
removing continuous paper.
2. Tear off the continuous paper.
3. Press the load/eject button to feed continuous paper backward to the top of
form position. Feeding continuous paper backward for more than two
Another way is to press “load/eject ” button to load the paper.
Do not use the platen knob on the left side of printer when
the printer is powered on, or it may change the top of form
position or damage the printer.
If the tear-off position of continuous paper is not aligned with the
tear-off edge of printer, use
micro adjustment function to adjust it.