Cetacea Sound Orbiter Owner's Manual - Manual (Page 9)

8
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND KEEP A COPY OF THIS GUIDE IN A SAFE PLACE
Installation
LANYARD KIT
How to remove excess lanyard material
If desired, the lanyard can be shortened to remove excess
lanyard material.
Untie the lanyard material.
Remove spring-loaded cord lock.
Cut lanyard pieces to equal length.
Reinstall spring-loaded cord lock.
Tie off both ends of lanyard material.
How to attach lanyard clips
In the case that lanyard material is removed from the clips,
please follow these instructions to reinstall.
With clip pieces detached, thread lanyard material
through bottom clip.
Attach lanyard clip top hinge piece.
Close clip and press together until it locks.
Cut off any extra material as desired.
Diagrams
1) THREAD MATERIAL
THROUGH CLIP
2) ATTACH CLIP TOP
3) CLOSE CLIP TOP
C
C