Cetacea Sound Orbiter Owner's Manual - Manual (Page 17)

16
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND KEEP A COPY OF THIS GUIDE IN A SAFE PLACE
Operation
ESTABLISH A WIRELESS CONNECTION
C
D
1. Ensure transmitter is charged.
2. Disconnect charger from transmitter.
3. Turn transmitter ON.
Click MASTER CONTROL
Green LED will glow steady.
4. Check desktop receiver for wireless connection.
WIRELESS CONNECTION
Amber LED will glow steady.
Diagrams
Wireless transmitter/receiver connection
R/C
WIRELESS CONNECTION
Amber LED
RECEIVER FRONT
STATUS INDICATOR LED
On / mute – green steady
Charging – green blinking
Charged – green steady
Low battery – green blinking
NOTE
The Orbiter will not connect to the receiver
while charging. Once charged, disconnect
charger and operate pendant as normal.