Cetacea Sound Orbiter Owner's Manual - Manual (Page 8)

7
Installation
LANYARD KIT
The Orbiter includes a pre-built lanyard and spring-loaded cord
lock for length adjustment.
Insert clips into Orbiter
To install the lanyard, simply insert the clips into both sides of
the Orbiter. The clips will lock into place. To remove, squeeze
the clips and pull.
Adjustable spring-loaded cord lock
Once installed, the lanyard's length is adjusted by squeezing
and moving the included cord lock. The microphone should rest
approximately 4-6" away from the chin.
Diagrams
ADJUST LANYARD LENGTH
Squeeze and move cord lock
INSERT
C
C