Dynalink RTA770 - Manual (Page 73)

Chapter 4: Web Configuration
61
Management
Admin Account
This page allows you to type in the password for accessing into your DSL Router.
For the Admin Account, the default setting
for user password is admin. If you want to
change the username and the password,
please retype the new password in the
Confirm field for confirmation. Then click
Apply.
Remote Access
There are four interfaces for the remote access. Please choose one of them if you want to enable the
remote access control.
Select the Internet Connect:
Select one connection item from the drop
down list to enable the function.
Web Browser:
Choose this box if you want to have remote
control through HTTP. The default port
number will be shown in the box. Modify
this number whenever you want.
Telnet:
Choose this box if you want to have remote
control through telnet.
SNMP:
Choose this box if you want to have remote
control through SNMP agent.
Ping:
Choose this box if you want to have remote
control through ping command under DOS
prompt.