Dynalink RTA770 - Manual (Page 109)

Appendix B: Server Setup for 802.1x Client
97
Enable 802.1x authentication and Encryption for wireless
card
1. Open up the properties for your
wireless connection, either by
Right-click on My Network Places on
the desktop, select Properties, or Open
up the Control Panel, select Network
Connections (located under Network
and Internet Connections if in
Category View)
2. Right Click on the Wireless Network
Connection, and select Properties.
3. Select the Authentication Tab, and
ensure that Enable network access
control using IEEE 802.1X is
selected, and
Smart Card or other
Certificate is selected from the EAP
type.
4. Click on the Wireless Networks tab.
5. Select the wireless network on which
you want to enable dynamic WEP from
under Available Networks, and select
Configure.