Dynalink RTA770 - Manual (Page 21)

Chapter 3: Configuration
9
5. On the left side of the windows, highlight
Microsoft and then select TCP/IP on the
right side. Then click OK
6. When returning to Network window,
highlight TCP/IP protocol for your NIC and
click Properties.
7. On IP Address tab:
Enable Specify an IP address option. Enter
the IP Address: 192.168.1.x (x is between 2
and 254) and Subnet Mask: 255.255.255.0 as
in figure below. On Gateway tab: Add a
gateway IP address: 192.168.1.1 and click OK