D-Link DIR-68 User Manual

Page 86

Section 6 - Troubleshooting

• Configure your Internet settings:

• Go to Start > Settings > Control.Panel. Double-click the Internet.Options Icon. From the Security tab, click the button

to restore the settings to their defaults.

• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make

sure nothing is checked. Click OK.

• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.

• Close your web browser (if open) and open it.

• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should

open the login page for your the web management.

• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 0 seconds

and try accessing the configuration. If you have multiple computers, try connecting using a different computer.

2..What.can.I.do.if.I.forgot.my.password?

If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory

defaults.

To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the

button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 0 seconds to access

the router. The default IP address is 19.168.0.1. When logging in, the username is admin and leave the password box empty.