D-Link DIR-68 - Manual (Page 29)

9 D-Link DIR-68 User Manual
Section - Configuration
Wireless Settings
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions. Click Add.
New to create your own time schedule to enable the wireless function.
Service Set Identifier (SSID) is the name of your wireless network. Create
a name using up to characters. The SSID is case-sensitive.
Select 2.4GHz if you want to use the .4GHz band or 5GHz band if you
want to use the 5GHz band.
2.4GHz:
Select one of the following:
802.11g.Only - Select if all of your wireless clients are 80.11g.
Mixed.802.11g.and.802.11b - Select if you are using both 80.11b
and 80.11g wireless clients.
802.11b.Only - Select if all of your wireless clients are 80.11b.
802.11n.Only - Select only if all of your wireless clients are 80.11n.
Mixed.802.11n,.802.11b,.and.802.11g - Select if you are using a mix
of 80.11n, 11g, and 11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using a mix of 80.11n
and 80.11g wireless clients.
5GHz:
Select one of the following:
802.11a.Only - Select if all of your wireless clients are 80.11a.
802.11n.Only - Select only if all of your wireless clients are 80.11n.
802.11n.and.802.11a - Select if you are using both 80.11b and 80.11g wireless clients.
Enable Wireless:
Wireless Network
Name:
802.11 Mode:
802.11 Band: