D-Link DIR-68 - Manual (Page 34)

4 D-Link DIR-68 User Manual
Section - Configuration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will
assign the IP address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Check this box to enable the reservation.
Enter the computer name or select from the drop-
down menu and click <<.
Enter the IP address you want to assign to the
computer or device. This IP Address must be within
the DHCP IP Address Range.
Enter the MAC address of the computer or device.
If you want to assign an IP address to the computer
you are currently on, click this button to populate
the fields.
Click Save to save your entry. You must click Save.
Settings at the top to activate your reservations.
In this section you can see what LAN devices are
currently leasing IP addresses.
Click Revoke to cancel the lease for a specific LAN
device and free an entry in the lease table. Do this only
if the device no longer needs the leased IP address,
because, for example, it has been removed from the
network.
Enable:
Computer Name:
IP Address:
MAC Address:
Copy Your PC’s
MAC Address:
Save:
Number of
Dynamic DHCP
Clients:
Revoke: