D-Link DIR-68 - Manual (Page 47)

47 D-Link DIR-68 User Manual
Section - Configuration
Enter a name for the inbound filter rule.
Select Allow or Deny.
Check to enable rule.
Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Enter the ending IP address. Enter 55.55.55.55
if you do not want to specify and IP range.
Click the Add button to apply your settings. You
must click Save. Settings at the top to save the
settings.
This section will list any rules that are created. You
may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon to
remove the rule.
Name:
Action:
Enable:
Remote IP Start:
Remote IP End:
Add:
Inbound Filter
Rules List:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure
inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port
Forwarding, or Remote Administration features.
Inbound Filters