D-Link DIR-68 - Manual (Page 38)

8 D-Link DIR-68 User Manual
Section - Configuration
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application from
the drop-down menu. Select an application and click <<
to populate the fields.
Enter the IP address of the computer on your local
network that you want to allow the incoming service to.
If your computer is receiving an IP address automatically
from the router (DHCP), you computer will be listed in
the “Computer Name” drop-down menu. Select your
computer and click <<.
Enter the TCP and/or UDP port or ports that you want
to open. You can enter a single port or a range of ports.
Seperate ports with a common.
Example: 4,1009,000-4000
Select Allow.All (most common) or a created Inbound
filter. You may create your own inbound filters in the
Advanced.>.Inbound.Filter page.
The schedule of time when the Virtual Server Rule will
be enabled. The schedule may be set to Always, which
will allow the particular service to always be enabled.
You can create your own times in the Tools > Schedules
section.
Name:
IP Address:
TCP/UDP:
Inbound Filter:
Schedule: