D-Link DIR-68 User Manual

Page 20

Section - Configuration

If you selected Dynamic, you may need to enter the MAC address of the computer

that was last connected directly to your modem. If you are currently using that

computer, click Clone.Your.PC’s.MAC.Address and then click Next to continue.

The Host Name is optional but may be required by some ISPs. The default host name

is the device name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click Next to

continue.

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and

DNS server addresses.

Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click Next to

continue.