D-Link DIR-68 - Manual (Page 55)

55 D-Link DIR-68 User Manual
Section - Configuration
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enter the new password for the User login. If you login as the User,
you can only see the settings, but cannot change them.
Enter a name for the DIR-68 router.
Remote management allows the DIR-68 to be configured from
the Internet by a web browser. A username and password is still
required to access the Web-Management interface. In general, only
a member of your network can browse the built-in web pages to
perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
The port number used to access the DIR-68.
Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address
of the DIR-68 and 8080 is the port used for the Web Management
interface.
This section will list any rules that are created. You may click the
Edit icon to change the settings or enable/disable the rule, or click
the Delete icon to remove the rule.
Admin Password:
User Password:
Gateway Name:
Remote
Management:
Remote Admin
Port:
Inbound Filter:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two
accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write
access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has
the ability to change both admin and user account passwords.