Deleting a displayed entry, Ending callback display, Call waiting (camp-on) – Deutsche Telekom Octophon F400 User Manual
Page 45: Busy override - joining a call in progress
If You Cannot Reach a Destination ...
45
Step by Step
Deleting a displayed entry:
Press the "OK" dialog key to confirm your selection
Ending callback display:
Select and confirm.
or
or
or
or
Press the key. The LED goes out.
or
or
or
or
Press the key. The LED goes out.
Call Waiting (Camp-On)
Precondition:
Precondition:
Precondition:
Precondition: You have dialed an internal number and hear a busy
signal. It is important that you reach the called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the display and
the busy tone is followed by the ring tone.
The called party can then respond (
Busy Override - Joining a Call in Progress
This function is only available if it has been configured by the service
technician (contact System Support).
Precondition:
Precondition:
Precondition:
Precondition: You have dialed an internal number and hear a busy
signal. It is important that you reach the called party.
Select and confirm.
or
or
or
or
Enter the code.
The called party and person to whom this party is talking hear an
alerting tone every two seconds.
If the called party has a system telephone with display, the following
appears on the screen: "Override: (station no. or name)".
You can now start talking.
Delete?
End?
Program/Service
Speaker
Camp-on
The called party can prevent automatic call waiting
(
If this function is configured (contact System Support) you
will immediately hear the ring tone and the message "You are
camped on!" will be displayed.
Override?