Deutsche Telekom Octophon F400 - Manual (Page 29)

Making Calls
29
Step by Step
Trunk Flash
To activate ISDN-type services and features through the network car-
rier’s analog trunks or those of other communication systems (such
as "consultation hold"), you must send a signal to the trunks before di-
aling the service code or telephone number.
Precondition: Precondition: Precondition: Precondition: You have set up an external connection.
Press the key. The LED lights up.
Select and confirm.
or or or or
Enter the code.
Enter the service code and/or telephone number.
Associated Dialing/Dialing Aid
If this function has been configured (contact System Support), you
can use a dialing aid to dial numbers and set up calls for your tele-
phone.
The operating procedure depends on whether the dialing aid is con-
nected to the S
S S S
0 0 0 0
bus bus bus bus or the a/b (T/R) port a/b (T/R) port a/b (T/R) port a/b (T/R) port.
You can also use your system telephone as a dialing aid for other tele-
phones.
Dialing aid on the S
0
bus:
On the PC, select a destination and start dialing.
The speaker on your telephone is switched on. Lift the handset when
the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC select a destination and start dialing.
"Lift the handset" appears on the PC screen.
Lift the handset.
Program/Service
* 51=Trunk flash?