Bronkhorst Mini CORI-FLOW - Manual (Page 29)

BRONKHORST CORI-TECH B.V.
3.9 RS232 communication cable T-part
Note:
Special RS232 cable has partnr. 7.03.444 and consists of a T-part with 1 male and 1 female 8-pin DIN
connector on one instrument-side and a normal female sub-D 9 connector on the side of the computer.
By means of this cable it is possible to offer RS232 communication and still be able to connect power-supply
and analog interface through the (analog) 8-pin DIN connector.
RS232 communication is only possible with a baudrate of 38.4 KBaud and can be used for either:
• Uploading new firmware by means of a special program (for trained Bronkhorst-service personnel only)
• Servicing your instrument using Bronkhorst-service programs (for trained Bronkhorst-service personnel
only)
• Operating your instrument using FLOWDDE, FLOWB32.DLL or RS232-ASCII protocol (end user)
9.17.050 page 29