Bronkhorst EX-FLOW Mass Flow - Manual (Page 21)

BRONKHORST HIGH-TECH B.V.
4.5.2 Cable gland assembly customer side
Fold the shield of the cable back over the cable (shield must be around the cable)
shielded cable
e.g. LAPP LiYCY shield
metal cable gland
e.g. HUMMEL HSK-M-EMV
shield
15 mm 35 mm
Mount the metal PG cable gland as shown in the drawing above.
4.5.2 Cable gland assembly instrument side
30 mm 15 mm
Solder a wire on the shield of the cable
Place a shrinktubing over the shield in such
a way that the shield is not visible after shrinking
Metal cable gland e.g. HUMMEL HSK-M-EMV
Shield of
Cable +
shrinktubing
Wires of
cable
Soldered wire
( screen)
Exproof flowmeter
50 mm 15 mm
Place a shrinktubing over the shield in such
a way that the shield is not visible after shrinking
Metal cable gland e.g. HUMMEL HSK-M-EMV
Shield
cable +
shrinktubing
Wires of
cable
Exproof valves
9.17.028 page 21