Dynasty Stoves Modular System DOBB1803A - Manual (Page 9)

8
INSTALLATION OF YOUR DYNASTY GRILL
(continued)
installation
Gas Requirements
Your Dynasty grill is designed to work with Natural or Propane
Gas. Check your rating plate to make sure the gas supply
provided is the gas type listed on the rating plate (see page 3).
An installer supplied gas shut-off valve must be located in an
easily accessible location. Use only pipe sealant that is an
approved type and is resistant to the actions of propane gas.
IMPORTANT: Your Dynasty grill must use the gas type
specified unless converted by an authorized servicer using
factory parts.
IMPORTANT: All plumbing must comply with applicable
codes (see page 2).
TYPICAL BOTTOM
GAS CONNECTION
REGULATOR
STREET ELBOW
MANIFOLD PIPE
ELBOW MAY BE ROTATED FOR
REAR GAS CONNECTION
AS SHIPPED FROM
FACTORY
INSTALLER SUPPLIED SHUT OFF VALVE IN
ACCESSIBLE LOCATION
• Typical Natural Gas Hook Up