Bolide Dvr Client - Manual (Page 41)

DvrClient Software Operation Manual
- 41 -
Picture 7-28
7.7.3 Events
Picture 7-29
¾ Alarm out: Allows you connect external alarm sensor
¾ Latch: you can set how long the buzzer will sound when the alarm ends (10s, 20, 40s,
60s).
7.7.3 Maintain
Allow you set auto-reboot and reboot time as per your actual requirement shown as
Picture 7-30.
Picture 7-30
8 E-map
8.1 Edit the E-map
Click the [ ] icon to enter into the below window shown as Picture 8-1. And initial
Open mode is maximized.
Picture 8-1
Below picture 8-2 is shown as E-map tool-bar.
¾ Event Type: support the three abnormal types: Disk No Space,
Disk Error and Video Loss.
¾ Enable/Disable: allow you enable/disable abnormal alarm.
¾ Buzzer time: you can set how long the buzzer will sound
when abnormal occurs. (Off, 10s, 20, 40s, and 60s).
¾ Show Message: You can set show message on the screen when
abnormal occurs.
¾ Send Email：Allows you send one alarm images to a specified
email when abnormal occurs.