Bolide Dvr Client - Manual (Page 11)

DvrClient Software Operation Manual
- 11 -
Picture 4-10
Channel Indicate the channel no. you could not modify this item under this menu.
Name Indicate current channel name. allow you change the name.
Protocol
Select its protocol of the channel: TCP and UDP optional (If Device connected to Dvr
Client via router, the router must support two network protocols.
Stream Type Select the stream type of the channel. Compound Stream and video stream optional
About alarm linkage:
Pop up Live Allow you pop up live alarm images.
Alarm time Len Allow you set alarm time, and time format is Minute (1~60 minute)
Capture
Allow you auto-capture images and save the images to a specified file when alarm
occurs.
Volume The buzzer will sound when alarm is triggered. (Details please refer to Section 4.4)
Record The channel will auto record when alarm is triggered.
Apply to Allow you apply above parameters to current channel or all other channels.
4.2.2.2 Add Area
（1） Add area
Right-click [Device list] icon and enter into [Add area] item shown as Picture 4-11.
Picture 4-11
Picture 4-12
Click [Add area] to pop up below window shown as Picture
4-12; Input area name and click [Ok]