Bolide Dvr Client - Manual (Page 31)

DvrClient Software Operation Manual
- 31 -
¾ Set your net type to Static;
¾ Set Client port number and HTTP port, and the ports need to be forwarded to a router.
¾ Input a specified IP address to [IP address] column.
¾ The Subnet Mask, gateway and DNS server should be consistent with your router’s
configurations.
¾ Input DNS address. Please check router firstly. The setting should be consistent with
router’s
¾ Click [Apply] button
¾ Now you could remotely visit the DVR via IP
http: // public net IP: web port (such as: 8080)
http: //intranet IP: web port (such as: 8080 - only use for Intranet)
Picture 7-9
3) When selecting PPPoE form the Type, user can input user name and password provided by
ISP and set Client and HTTP port. And now you can visit your remote DVR by using the IP
address captured after registering a domain name and web port and connect to your DVR
via public network.
Picture7-10
DDNS (Dynamic DNS) is a service that register a domain name and the floating IP
address with the DDNS server so that the domain name can be routed to the IP address
even if the IP address is changed in a dynamic IP system.
You could set and use DDNS to visit your remote DVR under above any one mode.