2 project settings, Project settings, Figure 32: select tools – BECKHOFF EL9800 User Manual

Page 26: Figure 33: microchip xc16 toolsuite

I-24

Application Note EL9800

6.2

Project settings

a. To select the compiler, linker and assembler choose [Project]  [Select Language

Toolsuite…] in menu bar.

Figure 32: Select tools

b. Choose the corresponding Toolsuite

<= EL9800_2:

“HI-TECH PICC-18 Toolsuite”.

>= EL98004A:

“Microchip XC16 Toolsuite”

c. If necessary correct the path in the location field.

Figure 33: Microchip XC16 Toolsuite

a. Select the corresponding PIC for the EtherCAT slave platform. Therefore click [Configure] 

[Select Device…].
For evaluation boards up to and including version EL9800_2 select

“PIC18F452”.

For evaluation boards from version EL9800_4A select “PIC24HJ128GP306”